Home › Pool shock & chlorine calculator

Pool Shock & Chlorine Calculator

Raise your free chlorine to a target, or shock to breakpoint from your test results. Pick the product you actually have, and get the amount to add plus what else it adds to your water.

By Engr. Nasir Naseer Khan · Reviewed 2026-11-17

What do you want to do?

—

Safety: never mix chlorine products with each other or with acid. Pre-dissolve granular shock in a clean bucket of pool water (add the chemical to the water, never water to the chemical), pour it in with the pump running, and follow the label. Shock in the evening, because sunlight breaks chlorine down.

Raise chlorine or shock: which do you need?

How the calculation works

A ppm is a milligram per litre, so 1 ppm in 10,000 US gallons (37,854 litres) is 37.85 grams of chlorine. The calculator works out the grams you need, then divides by how much chlorine your product carries:

Worked example: breakpoint shock

A 15,000-gallon pool tests at FC 1.5 ppm and TC 2.3 ppm:

How much product raises 10,000 gallons by 1 ppm

ProductAmount per 1 ppmAlso adds (per 1 ppm)
Liquid chlorine 12.5%10.8 fl oz—
Liquid chlorine 10%13.4 fl oz—
Household bleach 8.25% (unscented)16.3 fl oz—
Household bleach 6% (unscented)22.4 fl oz—
Cal-hypo shock 65%2.1 oz (58 g)+0.7 ppm calcium
Cal-hypo shock 73%1.8 oz (52 g)+0.7 ppm calcium
Dichlor granules 56%2.4 oz (68 g)+0.9 ppm CYA
Trichlor 90% (tablets/granules)1.5 oz (42 g)+0.6 ppm CYA

Multiply by the ppm you need and by your pool size ÷ 10,000. Granular amounts are by weight, not by volume.

12.5% liquid chlorine to raise free chlorine by 10 ppm

Pool sizeFluid ouncesUS gallons
10,000 gal1080.8
15,000 gal1611.3
20,000 gal2151.7
25,000 gal2692.1
30,000 gal3232.5

Frequently asked questions

How much shock do I need for a 10,000-gallon pool?

It depends on how far you need to raise free chlorine and which product you use. Raising 10,000 gallons by 10 ppm takes about 108 fl oz (0.84 gal) of 12.5% liquid chlorine, or about 1.3 lb of 65% cal-hypo. A fixed “one pound per 10,000 gallons” rule ignores both your test results and the product strength, which is why this calculator asks for them.

What is combined chlorine, and when should I shock?

Combined chlorine (CC) is total chlorine minus free chlorine. It is chlorine that has already reacted with contaminants and no longer sanitises well, and it causes the “chlorine smell”. Public-pool guidance treats a CC above about 0.2 ppm as a reason to shock. The breakpoint method raises free chlorine to 10 times the combined chlorine.

Can I use household bleach to shock my pool?

Yes, if it is plain, unscented bleach with no added thickeners or “splash-less” additives. It is the same chemical as pool liquid chlorine (sodium hypochlorite), just weaker, so you need more of it. Check the percentage on the label and pick it in the calculator.

Why does the calculator warn me about CYA with dichlor and trichlor?

Dichlor and trichlor contain stabilizer (cyanuric acid, CYA). Every 1 ppm of chlorine from dichlor adds about 0.9 ppm of CYA, and trichlor about 0.6 ppm. CYA only leaves the pool when you drain water, and the higher it climbs, the more chlorine you need for the same sanitising power. For a big shock, unstabilized chlorine (liquid or cal-hypo) avoids that build-up.

When can I swim after shocking?

Follow the re-entry instructions on the product label, and retest first. Do not swim while free chlorine is above the range the label allows.

Sources

Household bleach is labelled by weight and is slightly denser than water, so it carries a little more chlorine than this calculator assumes. You will land slightly above your target, which is the safe direction for sanitising.