Home › Pool volume calculator
Pool Volume Calculator
Find how many gallons your pool holds for any common shape, in feet or metres. The calculator shows its working, so you can check every step.
Measure water depth, not wall height. Most pools are filled to the middle of the skimmer opening, about 6 inches (15 cm) below the top of the wall.
How to measure your pool
- Length and width: measure the water surface at its longest and widest points, wall to wall.
- Round pools: measure straight across through the centre — that is the diameter.
- Depth: measure the water at the shallow end and at the deepest point. For a flat-bottom pool, just enter one depth.
- Kidney pools: measure the length, then the width across the larger lobe (A) and the smaller lobe (B).
The formulas
Every shape works the same way: surface area × average depth = cubic feet, then cubic feet × 7.48 = US gallons. In metres, cubic metres × 1,000 = litres.
| Shape | Surface area |
|---|---|
| Rectangle | length × width |
| Round | 3.1416 × (diameter ÷ 2)² |
| Oval | 3.1416 × (length ÷ 2) × (width ÷ 2) |
| Kidney / freeform | 0.45 × (A + B) × length (estimate) |
Worked example
A 32 × 16 ft rectangular pool, 3.5 ft at the shallow end and 8 ft at the deep end:
- Average depth = (3.5 + 8) ÷ 2 = 5.75 ft
- Volume = 32 × 16 × 5.75 = 2,944 ft³
- Gallons = 2,944 × 7.48 = 22,023 gallons
Round above-ground pool gallons chart
Gallons by diameter and water depth, calculated with the exact 7.48 gal/ft³ factor.
| Diameter | 3.5 ft of water | 4 ft of water | 4.5 ft of water |
|---|---|---|---|
| 12 ft | 2,961 | 3,384 | 3,807 |
| 15 ft | 4,627 | 5,288 | 5,949 |
| 18 ft | 6,662 | 7,614 | 8,566 |
| 21 ft | 9,068 | 10,364 | 11,659 |
| 24 ft | 11,844 | 13,536 | 15,228 |
| 27 ft | 14,991 | 17,132 | 19,274 |
| 30 ft | 18,507 | 21,151 | 23,795 |
Rectangular in-ground pool gallons chart
| Size | Flat 4 ft | 3.5 to 6 ft | 3.5 to 8 ft |
|---|---|---|---|
| 12 × 24 ft | 8,618 | 10,233 | 12,388 |
| 14 × 28 ft | 11,729 | 13,929 | 16,861 |
| 16 × 32 ft | 15,320 | 18,193 | 22,023 |
| 18 × 36 ft | 19,390 | 23,025 | 27,872 |
| 20 × 40 ft | 23,938 | 28,426 | 34,410 |
Frequently asked questions
How do I find the average depth of a pool with a shallow and deep end?
Add the shallow-end water depth to the deep-end water depth and divide by two. A pool that is 3.5 ft at one end and 8 ft at the other has an average depth of 5.75 ft. Measure the water, not the wall: most pools are filled to the middle of the skimmer, about 6 inches below the top.
How many gallons are in a cubic foot of water?
One cubic foot holds 7.48 US gallons (exactly 1728 ÷ 231). Many guides round this to 7.5, which over-states a 20,000-gallon pool by about 50 gallons. This calculator uses the exact figure.
How accurate is the kidney-shape formula?
It is an industry rule of thumb, 0.45 × (A + B) × length, that treats a kidney pool as about 90% of the rectangle around it. For an odd freeform pool, treat the result as an estimate within roughly 10%. If you have a salt pool, the salt reading after a known salt addition is a good cross-check.
Why does my pool volume matter?
Every chemical dose — chlorine, salt, pH and alkalinity adjusters — is calculated per gallon. Get the volume 20% wrong and every dose is 20% wrong too.
Sources
- NIST Handbook 44, Appendix C — US gallon defined as 231 cubic inches (so 1 ft³ = 1728 ÷ 231 = 7.4805 gal).
- Kidney-pool area rule 0.45 × (A + B) × L — the industry approximation used by pool builders and retailers such as swimmingpool.com.
- Hose flow varies with hose size and water pressure (roughly 5–17 gpm). To find yours, time how long a 5-gallon bucket takes to fill: 5 ÷ seconds × 60 = gallons per minute.